Model	Description	Software Model Number
DFUW, DUWC, VUWC	24 inch Wine Cellar	11
DFUR, DUAR, VUAR	24 inch Beverage Center	21
DFRD, DURD, VURD	24 inch Refrigerated Drawers	16

Viking Fridge Diagnostic Info

Option Diagnostics Establishing enables you to acknowledge the firmware and software program application variants, evaluation condition of “model details” system parts and also sensing units, as well as adjustment state of components where suitable (i.e.– compressor on/off, and so on.).

Making It Possible For Remedy Setting: To permit Remedy Setting, press along with hold the “WARMER” button while pressing the “COLDER” button 4 times within 5 secs.

You can deficient feasible for Solution Establishing while in Establish Mode.– All system functions will certainly continue to be in their existing state while in Service Mode.
Alarms suffer throughout Solution Setup and also reset after leaving Service Setting.
Option Setup will automatically disable after 5 (5) minutes of no keypad entry
After entering Solution Mode, the first number that you will certainly see suggests the software program variation number for the particular device you are servicing. For instance, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the really first number you will definitely see is 11. See chart listed below for matching design as well as software application referral.

The 2nd number you will absolutely see suggests the software program variation release. For example, if you see 44 on the display screen panel it indicates software program version 4.4.

Diagnostics:
While in Service Setup, press the “COLLECTION” button to tip with Tests 0-9. The first digit of the display will disclose the exam number. The 2nd number shows the present state of each component under examination as well as likewise is revealed as “1” getting on, CLOSED, or SHORTED in addition to “0” being OFF or OPEN. Examinations 0 and 1 disclose an open or shorted problem found at the noticing device inputs. Examinations 2 with 6 permit you to change lots ON with the “WARMER” button as well as OFF with the “COLDER” button. Evaluations 7 through 9 validate state change of the door switches and/or magnetic reed sensing unit. The component evaluations easily available are defined in Readily available Component Exams chart.

PROBLEM	POSSIBLE CAUSE	WHAT TO DO
Refrigerator does not operate	Refrigerator is not plugged in	Plug in refrigerator.
	Control is not on Fuse is blown, or circuit breaker needs to be reset	Properly adjust controls Replace blown fuses. Check circuit breaker and reset.
	Power outage has occurred.	Call local power company to report outage