Viking Refrigerator Diagnostic Information

Service Diagnostics Setting permits you to recognize the firmware as well as software program application variants, evaluation condition of “model details” system elements and also sensors, along with modification state of parts where suitable (i.e.– compressor on/off, and more.).

Making It Possible For Service Setting: To allow Solution Setting, press in addition to hold the “WARMER” switch while pushing the “COLDER” switch 4 times within 5 seconds.

You can not make it feasible for Service Establishing while in Establish Setting.– All system functions will certainly remain in their existing state while in Service Mode.
Alarm systems are impaired throughout Service Setting and reset after leaving Service Setting.
Option Setup will instantly disable after 5 (5) minutes of no keypad entrance
After entering Solution Setting, the first number that you will certainly see recommends the software application variation number for the particular device you are servicing. For example, if you are servicing a 24 inch wine rack (DFUW, DUWC, VUWC), the really initial number you will certainly see is 11. See chart below for matching layout and also software program application referral.

The 2nd number you will definitely see recommends the software program version launch. For instance, if you see 44 on the display screen panel it shows software program version 4.4.

Diagnostics:
While in Service Setting, press the “COLLECTION” switch to tip with Examinations 0-9. The preliminary number of the screen will disclose the assessment number. The second figure shows the present state of each component on trial and also is shown as “1” jumping on, CLOSED, or SHORTED in addition to “0” being OFF or OPEN. Tests 0 as well as 1 reveal an open or shorted problem identified at the noticing unit inputs. Evaluations 2 through 6 allow you to change great deals ON with the “WARMER” button along with OFF with the “COLDER” switch. Assessments 7 through 9 validate state change of the door changes and/or magnetic reed sensor. The component assessments readily available are specified in Readily available Element Assessments graph.