Appointment
ModelDescriptionSoftware Model Number
DFUW, DUWC, VUWC24 inch Wine Cellar11
DFUR, DUAR, VUAR24 inch Beverage Center21
DFRD, DURD, VURD24 inch Refrigerated Drawers16
Viking Refrigerator Common Problems
Viking Refrigerator Common Problems

Viking Refrigerator Diagnostic Information

Solution Diagnostics Setting permits you to recognize the firmware and also software application variations, assessment condition of “version certain” system parts as well as also sensing units, as well as adjustment state of parts where suitable (i.e.– compressor on/off, and so forth.).

Enabling Service Setting: To permit Service Setup, press as well as hold the “WARMER” button while pressing the “COLDER” button 4 times within 5 seconds.

You can deficient possible for Solution Establishing while in Establish Mode.– All system functions will remain in their existing state while in Service Setting.
Alarms are impaired throughout Solution Setup and also reset after exiting Option Setup.
Solution Setup will instantly disable after 5 (5) mins of no keypad entryway
After getting in Solution Mode, the very first number that you will definitely see suggests the software program version number for the particular system you are servicing. As an example, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the really first number you will definitely see is 11. See chart below for matching design and software application suggestion.

The 2nd number you will absolutely see recommends the software application variation release. As an example, if you see 44 on the display screen panel it shows software program version 4.4.

Diagnostics:
While in Service Setup, press the “COLLECTION” button to tip with Tests 0-9. The first figure of the display will certainly expose the evaluation number. The 2nd figure reveals the current state of each part under examination as well as also is revealed as “1” jumping on, CLOSED, or SHORTED in addition to “0” being OFF or OPEN. Examinations 0 and 1 reveal an open or shorted issue identified at the picking up unit inputs. Examinations 2 through 6 enable you to transform whole lots ON with the “WARMER” button as well as OFF with the “COLDER” button. Examinations 7 via 9 validate state modification of the door switches and/or magnetic reed sensor. The component evaluations conveniently available are defined in Readily available Component Assessments chart.

PROBLEMPOSSIBLE CAUSEWHAT TO DO
Refrigerator has an odorCompartment is dirty or has odor causing food.Clean it