(323) 784-9322
Mon - Sun : 24 Hours
Appointment
ModelDescriptionSoftware Model Number
DFUW, DUWC, VUWC24 inch Wine Cellar11
DFUR, DUAR, VUAR24 inch Beverage Center21
DFRD, DURD, VURD24 inch Refrigerated Drawers16
Viking Refrigerator Common Problems
Viking Refrigerator Common Problems

Viking Refrigerator Diagnostic Information

Solution Diagnostics Setting enables you to recognize the firmware as well as software application variants, exam condition of “version particular” system elements and additionally sensors, in addition to change state of parts where appropriate (i.e.– compressor on/off, and so forth.).

Making It Possible For Option Setting: To allow Service Setup, press in addition to hold the “WARMER” button while pushing the “COLDER” switch four times within 5 secs.

You can not make it feasible for Solution Setting while in Establish Setting.– All system features will certainly stay in their existing state while in Service Setting.
Alarm systems suffer during Solution Setting as well as reset after exiting Solution Setting.
Remedy Setup will immediately disable after 5 (5) mins of no keypad entrance
After entering Service Mode, the first number that you will certainly see recommends the software application variation number for the particular device you are servicing. For example, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the extremely initial number you will absolutely see is 11. See graph listed below for matching design as well as software program application recommendation.

The 2nd number you will absolutely see recommends the software variation release. For example, if you see 44 on the display screen panel it indicates software application version 4.4.

Diagnostics:
While in Service Setup, press the “COLLECTION” switch to tip with Tests 0-9. The initial number of the display will disclose the assessment number. The second figure reveals the existing state of each element under examination and also is revealed as “1” getting on, CLOSED, or SHORTED as well as “0” being OFF or OPEN. Tests 0 and also 1 expose an open or shorted issue detected at the noticing device inputs. Evaluations 2 with 6 permit you to transform great deals ON with the “WARMER” switch along with OFF with the “COLDER” switch. Evaluations 7 through 9 validate state change of the door switches over and/or magnetic reed sensor. The component examinations readily available are specified in Offered Element Exams chart.

PROBLEMPOSSIBLE CAUSEWHAT TO DO
Refrigerator or ice maker makes unfamiliar sounds or seems too loudNormal operation