Model | Description | Software Model Number |
DFUW, DUWC, VUWC | 24 inch Wine Cellar | 11 |
DFUR, DUAR, VUAR | 24 inch Beverage Center | 21 |
DFRD, DURD, VURD | 24 inch Refrigerated Drawers | 16 |
Viking Refrigerator Diagnostic Information
Remedy Diagnostics Establishing permits you to identify the firmware as well as software application variants, examination condition of “version details” system parts and additionally sensing units, in addition to change state of components where relevant (i.e.– compressor on/off, and more.).
Allowing Option Mode: To allow Option Setup, press as well as hold the “WARMER” button while pushing the “COLDER” switch 4 times within 5 seconds.
You can deficient possible for Solution Setting while in Establish Mode.– All system functions will certainly stay in their existing state while in Service Setting.
Alarm systems suffer during Solution Setup and also reset after leaving Service Setting.
Remedy Setting will instantly disable after 5 (5) minutes of no keypad entrance
After getting in Service Mode, the first number that you will certainly see suggests the software application version number for the particular system you are servicing. As an example, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the very first number you will absolutely see is 11. See graph listed below for matching design and software application recommendation.
The second number you will definitely see recommends the software program version release. For instance, if you see 44 on the display screen panel it shows software application version 4.4.
Diagnostics:
While in Service Setting, press the “COLLECTION” button to tip with Tests 0-9. The initial figure of the display will reveal the assessment number. The second figure reveals the present state of each component under examination as well as additionally is shown as “1” jumping on, CLOSED, or SHORTED along with “0” being OFF or OPEN. Examinations 0 and also 1 expose an open or shorted issue detected at the noticing device inputs. Exams 2 with 6 enable you to transform great deals ON with the “WARMER” button along with OFF with the “COLDER” button. Assessments 7 through 9 validate state modification of the door switches over and/or magnetic reed sensor. The component evaluations easily offered are defined in Readily available Component Evaluations graph.
SOUND | POSSIBLE CAUSE | SOLUTION |
Clicking | Freezer control clicks when starting or stopping compressor. | Normal operation |