(323) 784-9322
Mon - Sun : 24 Hours
Appointment
ModelDescriptionSoftware Model Number
DFUW, DUWC, VUWC24 inch Wine Cellar11
DFUR, DUAR, VUAR24 inch Beverage Center21
DFRD, DURD, VURD24 inch Refrigerated Drawers16
Viking Refrigerator Common Problems
Viking Refrigerator Common Problems

Viking Fridge Diagnostic Details

Remedy Diagnostics Setting enables you to identify the firmware as well as software application variants, examination condition of “version details” system components as well as additionally sensing units, as well as modification state of components where applicable (i.e.– compressor on/off, and so on.).

Enabling Service Setting: To permit Option Setting, press as well as hold the “WARMER” switch while pressing the “COLDER” button 4 times within 5 seconds.

You can not make it possible for Solution Establishing while in Establish Mode.– All system functions will certainly remain in their existing state while in Service Mode.
Alarms suffer during Solution Setup and reset after leaving Solution Setting.
Remedy Setting will automatically disable after 5 (5) minutes of no keypad entrance
After entering Solution Setting, the initial number that you will absolutely see recommends the software application version number for the particular unit you are servicing. As an example, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the really initial number you will certainly see is 11. See graph below for matching style and software application suggestion.

The 2nd number you will certainly see recommends the software application version release. For example, if you see 44 on the display screen panel it suggests software application version 4.4.

Diagnostics:
While in Service Setup, press the “COLLECTION” switch to tip with Tests 0-9. The first digit of the screen will certainly disclose the exam number. The second number reveals the existing state of each component on trial as well as also is shown as “1” jumping on, CLOSED, or SHORTED in addition to “0” being OFF or OPEN. Examinations 0 and 1 expose an open or shorted issue detected at the picking up device inputs. Evaluations 2 via 6 permit you to change lots ON with the “WARMER” switch in addition to OFF with the “COLDER” button. Evaluations 7 via 9 validate state change of the door switches and/or magnetic reed sensor. The component exams readily offered are defined in Offered Element Examinations graph.

SOUNDPOSSIBLE CAUSESOLUTION
ThumpingIce cubes from ice maker drop into ice bucket.Normal operation