Viking Fridge Diagnostic Info

Remedy Diagnostics Setting enables you to recognize the firmware and also software application variations, evaluation problem of “version particular” system components as well as additionally sensing units, in addition to modification state of components where appropriate (i.e.– compressor on/off, and so on.).

Allowing Remedy Setting: To allow Option Setup, press as well as hold the “WARMER” button while pressing the “COLDER” switch 4 times within 5 seconds.

You can deficient feasible for Service Setting while in Establish Setting.– All system features will certainly continue to be in their existing state while in Service Setting.
Alarm systems are impaired during Solution Setting as well as reset after exiting Option Setting.
Solution Setting will automatically disable after 5 (5) minutes of no keypad entrance
After entering Service Mode, the very first number that you will absolutely see recommends the software program version number for the particular device you are servicing. For instance, if you are servicing a 24 inch wine rack (DFUW, DUWC, VUWC), the extremely initial number you will absolutely see is 11. See graph below for matching layout as well as software program application suggestion.

The 2nd number you will absolutely see recommends the software application version release. For instance, if you see 44 on the display screen panel it indicates software application variation 4.4.

Diagnostics:
While in Service Setup, press the “COLLECTION” switch to tip with Examinations 0-9. The initial figure of the screen will certainly expose the evaluation number. The 2nd figure shows the existing state of each part under examination as well as additionally is revealed as “1” getting on, CLOSED, or SHORTED as well as “0” being OFF or OPEN. Examinations 0 as well as 1 expose an open or shorted problem identified at the noticing unit inputs. Assessments 2 through 6 allow you to transform whole lots ON with the “WARMER” button as well as OFF with the “COLDER” button. Evaluations 7 via 9 validate state change of the door switches and/or magnetic reed sensing unit. The part exams easily available are defined in Available Element Assessments chart.